An iGrade™ leveling system activation works with many of the different John Deere Precision Ag Technology components that producers may already own such as:

4600 CommandCenter™ Display/4640 Universal Display
4200 CommandCenter Display/4240 Universal Display
GreenStar™ 3 2630 Display
StarFire™ 3000 Receiver or StarFire 6000 Receiver
AutoTrac™ assisted steering system
Surface Water Pro™ Plus software on GreenStar 3 2630 and GreenStar 2 2600 Displays only

It requires a vehicle global positioning system (GPS) only; the receiver must have an SF2 or greater signal level.

NOTE: Do not mismatch generations. If a StarFire 3000 is used on the machine, a StarFire 3000 must be used on the implement if utilizing a second receiver for specific operation.

NOTE: See this link for further StarFire 6000 compatibility information.

iGrade is approved for the following platforms:

Compatible tractors:

Non-John Deere tractors, 60 Series and older tractors, 5XXX, 6X00, 6X10, 6X30, 7X00, 7X10, and Small- Frame 7X20/7X30 Tractors
- Compatible using external selective control valve (SCV) and external SCV switch.
7X20 small frame, 8X00, 8X10, 8X20, 9X00, 9X10, and 9X20
- Compatible using John Deere legacy SCV. Running with John Deere legacy requires using SCVs 1 or 3 and connecting the UCC harness to the option connector at the rear of the tractor cab.
7X30, 8X30, U8, 9X30, 6R (Final Tier 4 [FT4] only), 7R, 8R/RT, and 9R/RT/RX
- Compatible using John Deere proprietary SCV type. Any SCVs can be used and an option connector is not used.
6R, 6M*, 7R, 8R/RT, and 9R/RT/RX
- Compatible using ISO SCV type. Any SCVs can be used and an option connector is not used.
- *When equipped with optional electronic SCVs.
AutoTrac compatibility
- Compatible with integrated AutoTrac, AutoTrac Controller, and AutoTrac Universal

iGrade requires the receiver to have an RTK signal level. iGrade does not support WAAS, EGNOS, SF1, SF2, or SF3 signal levels.

The John Deere Application Controller 1100 is required for iGrade activation.

Harness compatibility

UCC2 Application Controller 1100 (serial number PCXL01C201000+) is not compatible with original UCC1 Application Controller 1100 harnessing. Plugging the UCC2 controller into UCC1 harnessing will cause CAN bus issues due to no terminator in the circuit.

Harness options

Ensure UCC2 main harness PFA11888 is used with the UCC2 Application Controller and replaces the existing harness connection. Adaptor harness schematics are available in the Technical Manual to create a wiring adaptor from UCC2 Application Controller 1100 to the existing harnessing from a UCC1 system.

iGrade™

Call for Price

Similar Products

Surface Water Pro™ Plus Surface Water Pro™ Plus

John Deere Mobile Weather