John Deere 3025E: Key Specifications and How It’s Used
10/8/2026
Thinking about a new tractor? Consider the John Deere 3025E. The John Deere 3025E is a 24-horsepower, four-wheel-drive compact utility tractor with a two-range hydrostatic transmission. It lifts 1,356 pounds on the Category 1 three-point hitch and 1,186 pounds on the 300E loader. Owners use it for loader work, mowing, grading, and light chores on small acreage.
That combination puts the 3025E in the middle of the compact class. It has the power to turn a rotary cutter or a tiller and the loader capacity to move gravel, hay, and brush, without the size or the cost of a full utility tractor. Let’s take a deeper dive into the John Deere 3025E’s specs and what jobs owners actually use it for on their property.
Here’s how the John Deere 3025E stacks up in terms of engine power, PTO, drivetrain, dimensions, and more.
The 24-horsepower engine and 19.4 PTO horsepower determine what implements the tractor can turn. The 1,356-pound hitch lift sets what it can pick up and carry behind it.
The hydrostatic transmission matters just as much in daily use. There is no clutch and no shifting under load, so you set the range and then control speed and direction with two foot pedals. That is a real advantage on loader work, where you change direction every few seconds.
Specs tell you what the tractor can do, but they only tell you part of the story. Here is what owners in West Tennessee actually do with it in the real world.
Loader work is the job most 3025E owners bought the tractor for. The 300E loader lifts 1,186 pounds at full height and reaches 84 inches up. That clears the side of most pickup beds and dump trailers, and boom breakout force of 1,704 pounds is enough to knock loose packed gravel or dig into a dirt pile. The bucket also makes a decent counterweight when you are running a heavy rear implement.
Rough ground is where a rotary cutter earns its keep. The RC2084 rotary cutter runs off the 540-rpm rear PTO and cuts a 48-inch swath, which covers pasture, fence lines, ditch banks, and land you only mow twice a year.
Gravel drives and dirt work are a steady chore in this part of Tennessee. A rear blade like the RB22 Series pulls washboard out of a drive and moves loose material back to the center. Run it in reverse to backfill, or angle it to cut a shallow ditch.
Food plots and gardens need ground prep, and the 3025E has the PTO power for it. The RT30 Series rotary tiller works a wide pass, and a broadcast spreader like the SS20B handles seed and fertilizer, so that pairing covers a food plot from ground work through planting.
Chores around a barn or shop round out the list. A 60-inch manure fork moves hay, mulch, brush, and bedding, and the two rear selective control valves let you run hydraulic implements without adding plumbing. If you need to dig a water line or set a post footing, the 370B backhoe attaches to the same tractor.
John Deere lists a specific set of implements as recommended for the 3025E. Two optional Quick Connect accessories make swapping them faster. The iMatch Quick Hitch squares up and latches a Category 1 implement, and the Quik-Knect PTO receiver lets the driveline slide on without wrestling it into place. Both are listed as compatible with the 3025E. On the front, the 300E loader has a quick-change attachment carrier, so the bucket comes off and a fork or a blade goes on without tools.
Our parts department can order any of these and check fitment against your serial number.
The 3025E is sized for property, not production. It fits owners with roughly five to 30 acres who need one tractor to handle mowing, loader work, and grading. It also earns its spot as a chore tractor on a larger farm, where the bigger machines are tied up in the field during planting and harvest.
Consider stepping up if you plan to run a heavy rotary cutter wider than 60 inches, handle round bales above about 1,200 pounds, or spend long days in the seat and want a cab. The 3032E and 3038E share the same frame with more power, and the 3-Series R models add features like a self-leveling loader. Our sales staff can walk you through the difference with both tractors sitting side by side.
Tennessee Tractor has 10 locations across West Tennessee, from Union City down to Somerville. Stop by any of them, and we will put you on a 3025E with the implements you are actually planning to run. Our parts and service teams stay with the tractor long after the sale.
It is a well-matched tractor for small-acreage work, pairing enough horsepower for a rotary cutter and tiller with a loader and hydrostatic drive that keep it easy to operate. It is not built for heavy field work or all-day production, and it was never meant to be.
The 300E loader lifts 1,186 pounds at full height, measured at the bucket pivot. Measured 500 millimeters ahead of the pivot, which is closer to how a real bucket load actually sits, the capacity is 845 pounds. On the back, the Category 1 three-point hitch lifts 1,356 pounds, measured 24 inches behind the link arms.
The 3025D was the lower-priced model in the 3-Series lineup and came with a gear transmission and fewer standard features. The 3025E uses a two-range hydrostatic transmission with Twin Touch pedals, along with an independent rear PTO. John Deere has since simplified the lineup, so check current availability with your dealer.
Price depends on model year, hours, tire type, and whether a loader and implements are included. New tractor pricing and current John Deere offers change throughout the season. Used values swing on hours and condition. Ask your local Tennessee Tractor store for a current quote or check what is on the lot.
The 3025E has a naturally aspirated three-cylinder diesel engine and a 7.5-gallon fuel tank. Fuel use depends on the job, and light mowing burns far less than steady loader work at full throttle. Many owners get a full day of mixed chores out of one tank.
Yes. The 3025E has a Category 1 three-point hitch with position control and a 540-rpm independent rear PTO. That covers most standard Category 1 implements that fall within its lift and horsepower range. Confirm the weight and PTO requirements for any implement before you buy it.
[Button: Read More FAQs]