John Deere 1600 Turbo

1600 Turbo for sale at Tennessee Tractor LLC. Serving your new and used equipment needs from Alamo, Brownsville, Brownsville, Dyersburg, Jackson, Martin, Paris, Ripley, Somerville, Trenton, Union City, Alamo, Brownsville, and Alamo, TN.

CroppedImage400225-1600-large.jpg

1600 Turbo

1600 Series

  • Get a quote
    • Fields with asterisks* and highlighted red are required.

      Please email our helpful staff with any questions or comments using the contact form.

  • Send to a friend
    • Fields with asterisks* and highlighted red are required.

      Your friend will receive an email that contains a reference to this page. Please send this email only to people you know who would be interested in this information.

  • Turbocharged diesel engine
  • Biodiesel kit available
  • Rear-discharge decks

ENGINE

Manufacturer Yanmar
Model 4TNV84T-ZDJWM
Displacement 122 cu in.1995 cc
Bore and Stroke 3.3 x 3.5 in.84 x 90 mm
Injection Direct
Starting Aid Air heater
Cylinders 4
Cycle 4
Horsepower (net intermittent) 55.3 net hp (41.2 kW) at 3000 rpm (per SAE J1349)
Horsepower (gross intermittent) 57.3 gross hp (42.7 kW) at 3200 rpm (per SAE J1995)
Rated Engine Speed 3000 rpm
Operating Range With isochronous governor - 1400-3200 rpm
Lubrication Pressurized lobe-style pump
Oil Filter Spin-on
Cooling Liquid-cooled water centrifugal
Cooling System Capacity 2.5 U.S. gal.7.5 L
Crankcase Capacity 6.1 U.S. qt5.8 L
Compression Ratio 19:01
Operating Torque (net continuous @ 3000 rpm) 97 lb-ft131.5 Nm
Max Torque per SAE J1349 (net continuous)(Nm) 117.3 lb-ft159 Nm
Air Cleaner Dual element, dry type
Air Restriction Indicator Standard, progressive type
Engine Shutoff Key
Radiator Location Rear mounted
Radiator Fins per Inch 10 fins per in.

FUEL SYSTEM

Fuel Type Diesel
Fuel Transfer Pump Electric
Fuel Filter Replaceable, spin-on type
Water Separator Replaceable, 100-mesh element
Cold Start Device Increased timing for better cold starting
Fuel Capacity 22 U.S. gal.83.3 L
Fuel Pump Type Mechanical
Fuel Neck Opening 37.6 cm
Fuel Tank Location Left side of the machine
Self-Bleeding System is self-bleeding because of the electric fuel transfer pump

FUEL CONSUMPTION

Full Load 3.33 gph12.7 L/hr
One-Half Load 1.93 gph7.31 L/hr

IMPLEMENT LIFT

Type Hydraulic, open center
Lift Cylinders Bore - 2 in.5 cm
Pump Gear

ELECTRICAL

Charging System Automotive type
Alternator 55 amp
Battery Voltage 12 V
Battery Cold Crank Amps 650 CCA
Starter Size 1.4 kW

HYDRAULIC SYSTEM

Traction Drive Pump 3.00 - displacement, axial piston pump cu in.
Motor 2.00 - displacement, axial piston pump cu in.
Type Closed loop, hydrostatic
Steering Relief 1050 psi
Implement Relief 1600 psi
Hydraulic Reservoir Capacity 14 U.S. gal.53 L

DRIVETRAIN

Transmission Type Hydrostatic
Transaxle Type Dual range
Transaxle Tuff Torque (Kanzaki)
4 Wheel Drive On demand or full time
4 Wheel Drive Type Mechanical rear-wheel drive
Differential Lock Mechanical, foot activated
Final Drive Planetary

BRAKES

Type Internal, wet disc
Steering Brakes Standard
Parking Brakes Rachet engagement

TRAVEL SPEED @ 3000 RPM

Low Forward Speed 0 - 8.6 mph0 - 13.8 km/h
High Forward Speed 0 - 14.4 mph0 - 23 km/h
Low Reverse Speed 0 - 4.3 mph0 - 6.9 km/h
High Reverse Speed 0 - 7.2 mph0 - 11.5 km/h

SOUND LEVEL (WITHOUT CAB)

With Deck 93 dBA
Without Deck 89 dBA

FRAME

Frame Type Welded, tubular steel
Thickness 11 gauge118 in.299 cm

STEERING

Type Power, hydrostatic
Tilt Steering Wheel Standard
Turns Lock-to-Lock 2.5
Turning Radius 39 in.99 cm

OPERATOR STATION

Seat Air-ride suspension seat, adjustable, deluxe, high-backed, back angle adjustment, standard armrests
Adjustment Positions 3
Armrests Yes
Safety Safety interlock and operator presence system

TIRES

Drive Tires (front) 26x12-12
Pressure 30 psi28 psi
Steering Tires (rear) 18x9.5-8
Tread Multi-trac
Ply Rating 6 PR (both)

DIMENSIONS

Length (with deck) 132 in.335 cm
Wheel Base 60 in.152 cm
Tread Width 52 in.131 cm
Width with Decks Down 134 in.340 cm
Height with ROPS 98 in.249 cm
Transport Width 84 in.213 cm
Ground Clearance 6.5 in.16.5 cm
Uncut Circle of Grass w/o Brakes 0
Vehicle Weight 4173 lb1892.8 kg
Machine Weight Without the Deck 3264 lb1474.2 kg

ROPS

Type Standard two-post folding ROPS or four-post canopy ROPS meets ISO21299 standard

CONTROLS

Throttle Hand
Forward/Reverse Two-pedal
Mower Lift Three two-function switches
Park Brake Foot pedal/disk
Indicator Lights Engine air heater, oil pressure light, engine temperature light, fuel gauge, hydraulic oil temperature light
PTO Engagement Electric solenoid switch
Type Hydraulic, independent
PTO Engagement/Disengagement Electric solenoid
Deck Drive Pump 2.48 - displacement, axial piston pump cu in.
Deck Motor 2.5 - displacement, gear motor cu in.
Type Hydraulic, open center, closed loop
Circuit Series

MOWER DECKS

Deck Drive Type Hydraulic, closed loop
Spindles Heat treated, diameter, 1 in.
Spindle Bearings Greaseable Yes
Energy-Absorbing Wing Decks Yes
Deck Circuit Series
Blade Drive C-section, V-belt
Cutting Widths 128, 94, 62 in.325, 239, 157 cm
Center Deck Cutting Width 62 in.1.57 cm
Wing Deck Cutting Width 42 in.107 cm
Transport Lock Standard
Discharge Rear
Deck Construction Fabricated
Deck Thickness 7 gauge0.177 in.
Height-of-Cut Range 1 - 5.5 in.2.5 - 13.9 cm
Wing Deck Float ---
Up (while maintaining PTO engagement) 45 degree (angle)
Down (while maintaining PTO engagement) 20 degree (angle)

MOWING RATE

80% Field Efficiency 10 acres/hr at 10 mph with 80 percent efficiency

ANTI-SCALP ROLLERS

Type Semi-pneumatic
Wing Deck Caster Wheels Four 11x4-5 semi-pneumatic
Front Deck Caster Wheels Two 11x4-5 semi-pneumatic

BLADES

Total Mower Blades 7, three center and two each side
Blade Length 22 in.55.88 cm
Blade Width 2.5, 6.35 in.
Blade Thickness 0.312 in.0.79 cm
Blade Tip Speed 13,000 fpm
Interchangeable Mower Blades Between All Decks Yes

MISCELLANEOUS INFORMATION

Warranty 2 years
Certification ANSI B71.4- 2004

IMPLEMENT RELIEF

Warranty 2 years
Certification ANSI B71.4- 2004